White and filler masterbatch
A low-viscosity FT wax that coats TiO₂ and calcium carbonate and lets the carrier run easier at high loadings.
- Drop point
- 112 °C
- Viscosity 135 °C
- ~10 cP
- Structure
- linear
Used in
Wets out pigment agglomerates without softening the compound — stronger colour from the same loading.
FT wax · PE wax · pastilles · powder
A low-viscosity FT wax that coats TiO₂ and calcium carbonate and lets the carrier run easier at high loadings.
Better pigment wetting and gloss, and less re-agglomeration — so colour strength holds at the same pigment loading.
The FT wax can stand in for PE wax in many masterbatches, possibly at a lower addition level. Prefer to stay with PE wax? We supply that too.
| Family | Drop point, °C | Melt viscosity | Structure | Compliance | Typical use |
|---|---|---|---|---|---|
| Fischer-Tropsch wax | 112 | ~10 cP at 135 °C | linear | — | White, black, filler and colour masterbatch |
| PE wax | 85–117 | 1,800–2,400 mPa·s at 160 °C | branched | — | Masterbatch, hot melts, PVC |
FT wax viscosity is a typical value. Bands span the grades we supply in each family. Figures are a starting point for sampling; the current TDS and CoA govern.
Packed in 25 kg bags.
Technical and safety data sheets, a certificate of analysis on every lot, and the declarations your quality team will ask for — sent without you having to chase them. Figures shown on this site are a starting point for sampling; the current TDS and CoA govern.
In many white, filler and colour masterbatches, yes — and because its melt viscosity is far lower, possibly at a lower addition level. We will suggest a trial ratio.
Used at normal levels, it lowers the effective viscosity of the carrier without compromising its mechanical properties.
Pastilles for most compounding lines; fine powder where you premix with pigment.
Yes, in pastilles and fine powder.
A line or two about what you are making is enough to start — we’ll take it from there.