MDF, HDF and chipboard
Hydrophobing emulsions that cut thickness swelling and water uptake in wood-based panels. Fully synthetic grades for premium boards and low-swelling HDF.
- Solids
- 30–62 %
- pH
- 8–10
- Viscosity 23 °C
- 30–900 mPa·s
Used in
Wax you can pump and dose straight into a waterborne process, with no melting step.
Anionic · cationic · non-ionic · paraffin · synthetic
Hydrophobing emulsions that cut thickness swelling and water uptake in wood-based panels. Fully synthetic grades for premium boards and low-swelling HDF.
Water resistance and printability for paper and board, including an FDA-listed grade for food packaging.
Paraffin, synthetic and FT dispersions for slip, scratch and rub resistance in waterborne inks and coatings — also fish-net and agricultural coatings.
A cationic semi-synthetic emulsion used for concrete curing, as well as wood and paper.
| Family | Solids, % | pH | Viscosity 23 °C, mPa·s | Compliance | Typical use |
|---|---|---|---|---|---|
| Panel emulsions | 30–62 | 8–10 | 30–900 | Anionic · non-ionic | MDF, HDF, chipboard, fibreboard |
| Panel & paper | 58–62 | ≤ 8 | ≤ 450 | Cationic option | Panels, paper sizing, concrete curing |
| Paper & board | 44–48 | ≤ 9 | — | FDA-listed | Food packaging paper & board |
| Inks & coatings | 39–62 | 7.5–9.2 | ≤ 350 | Anionic · non-ionic | Water-based inks, coatings, agri coatings |
Wax type spans paraffin, semi-synthetic, fully synthetic and Fischer-Tropsch. Bands span the grades we supply in each family. Figures are a starting point for sampling; the current TDS and CoA govern.
Pack size confirmed per grade when you enquire.
Technical and safety data sheets, a certificate of analysis on every lot, and the declarations your quality team will ask for — sent without you having to chase them. Figures shown on this site are a starting point for sampling; the current TDS and CoA govern.
Our panel emulsions run from 30–62 % solids, paraffin to fully synthetic. Tell us your resin system and your swelling target, and we will match the grade.
Yes. Cationic grades suit some paper and concrete applications. We match the charge to the system you already run.
Yes, an FDA-listed paraffin emulsion for paper and board.
In many panel lines, yes, and synthetic grades are not tied to paraffin availability. Send us your current product and dosage and we will propose a trial grade.
A line or two about what you are making is enough to start — we’ll take it from there.